Cookie Img Back to top
   Call Me Free Offline Send SMSSend SMS Send InquirySend Inquiry
Home » Products » India Mark II Extra Deepwell Hand Pump » India Mark II Extra Deepwell Hand Pump

India Mark II Extra Deepwell Hand Pump

India Mark II Extra Deepwell Hand Pump
Product Code : 08
Product Description

India Mark II Extra Deepwell Handpumps

The Extra Deepwell Handpump (EXD) is almost the same as India Mark II handpumps but with the certain required modification to lift water from beyond 45 mtrs depth and upto 90 mtrs depth. Modifications done as under :-

(a) Heavier head handle assembly. Handle assembly provided with T-bar and additional weights recommended for upto 90 mtrs installation depth. Weight can be fixed on the T-Bar depending upon the installation depths as mentioned below.

(b) The EXD Cylinder assembly has three cup washers instead of two nos. as required in India Mark II.

PUMP HEAD (above ground pumping mechanism) Consisting of head handle assembly with T-bar and Counter weights water tank and pedestal fully fabricated in mild steel & duly hot dip galvanised . Available with different mounting arrangements, such as normal three Leg Pedestal suitable for 100mm dia bore hole, Telescopic three Leg Pedestal for 150mm dia bore hole & rectangular flange mounting arrangements.

CYLINDER ASSEMBLY consisting of cast iron body with brass sleeve of 63.5 mm dia, gun metal valve components and two nitrile rubber cup washer and fitted with reducer cap. Discharge 12ltrs/40 strokes in a minute & in one hour water yeild would be approx. 720 ltrs.

Options - SS Cylinder in AISI 304 grade available.

CONNECTING ROD of 12mm dia mild steel electro-galvanised, in three meter lengths with welded hexagonal coupling of size M12x50mm on one end and M12x20mm on the other end.

Options - SS Connecting Rod of AISI 304 grade with loose couplings available.

RISER PIPE (DROP PIPE) of 32mm N.B.G.I. medium in three meter lengths with socket at one end and thread protector cap on the other end.

OPTIONS - Also available SS Riser pipe of 38mm O.D. x 1.5/2mm wall thickness in SS AISI 304 grade with welded male coupling on one end and female coupling on other end.

HAND PUMP SELECTION GUIDE :

SI.
No.

PUMP TYPE

Stroke
Length

Recommended For Water Level Setting Depths (mtr.)

Minimum ID of Bore (mm)

Approx. Discharge
(Ltrs/hr)

1


India Mark-II Deep well Handpump as per BIS* specifications with 63.5mm dia cast iron brass sleeved cylinder assembly.

125

20-45

100

900

2

India Mark-II Extra Deep well Handpump as per BIS* specifications with 63.5 dia cast iron brass sleeved cylinder assembly.

100

45-90

100

720

3

Indian Mark-III (VLOM65)Deep well Handpump as per BIS* specifications with 65 mm dia cast iron brass sleeved open top cylinder assembly with extractable plunger and foot valves assemblies.

125

20-40

125

900

4

India Mark-III (VLOM50) Deep well Handpump as per BIS* specifications, with 50 mm dia cast iron brass sleeved open top cylinder assembly with extractable plunger and foot valves assembly.

125

20-50

100

600

5

U3 modified Deep well Handpump as per SKAT-HTN, Switzerland specifications with 50 mm dia open top, uPVC brass lined cylinder assembly with extractable plunger and foot valves assembly.

125

20-45

100

600

6

Afridev Deep well Handpump as per SKAT-HTN, Switzerland specifications with 50mm dia open top, uPVC brass lined cylinder assembly with extractable plunger and foot valves assembly

225

10-45

100

990

7

Shallow Well India Mark-II/India Mark-III modified Pump.

125

Upto

100

900

Modifications in designs may be considered as per customer requirements.


INTEC TOOLS PVT. LTD.


H-99, Sector -4, Bawana Industrial Area, Near Ganga Tolly Mandir, Delhi - 110039, India
Mr. Naresh Mehta (Marketing Director)
Quick Inquiry
Send Inquiry    Call Me Free Offline Send SMS

Product Showcase